Samsung NX1000 20.3MP NX SMART Digital Camera User Manual

141
Connecting to external devices > Transferring files to your computer
Disconnecting the camera (for Windows XP)
With Windows Vista and Windows 7, the methods for disconnecting the
camera are similar.
1
Ensure that no data is being transferred between the
camera and the computer.
• If the status lamp on your camera is blinking, it means the data
transfer is in progress. Please wait until the status lamp stops
blinking.
2
Click on the tool bar at the bottom right of your
computer screen.
3
Click the pop-up message.
4
Click the message box indicating safely removed.
5
Remove the USB cable.
Transferring files to your Mac computer
1
Turn off the camera.
2
Connect your camera to a Macintosh computer with the
USB cable.
Mac OS 10.4 or later is supported.
• You must plug the small end of the USB cable into your camera. If the
cable is reversed, it may damage your files. The manufacturer is not
responsible for any loss of data.
• If you try to plug the USB cable into the HDMI port, the camera may
not work properly. If it occurs, restart the camera.
3
Turn on the camera.
• When the pop-up message appears on the camera display,
select Computer.
4
Open the removable disk.
5
Transfer photos or videos to the computer.

Samsung NX1000 20.3MP NX SMART Digital Camera Specifications

General

Sensor	20.3MP APS-C CMOS
ISO Range	100-12800
Video Resolution	1920 x 1080 (Full HD)
Connectivity	Wi-Fi
Lens Mount	Samsung NX Mount
Continuous Shooting	8 fps
Dimensions	114 x 62.5 x 37.5 mm
Sensor Size	23.5 x 15.7 mm
Screen Resolution	921, 000 dots
Video Frame Rate	30 fps
Storage Media	SD, SDHC, SDXC
Battery Type	BP1030
Display	3.0-inch LCD
Shutter Speed	1/4000 sec - 30 sec
Weight	222 g (body only)
Image Stabilization	Lens-based
File Format	JPEG, RAW