EasyManua.ls Logo

Samsung NX58K9500WG - User Manual

Samsung NX58K9500WG
144 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
NX58H9500WS
NX58H9950WS
Slide-In Gas Range
User manual
imagine the possibilities
Thank you for purchasing this Samsung product.
Manual User_NX58H9500WS_DG68-00566A-01_EN_NonPF.indd 1 2014-07-30  1:01:25

Table of Contents

Questions and Answers

  • A
    Andrea JonesAug 16, 2025
    Why won't any of the burners light on my Samsung NX58K9500WG?
    • W
      Wanda JohnsAug 16, 2025
      If none of the burners are lighting, it could be due to several reasons: * The power cord may not be properly plugged into the electrical outlet. Ensure the electrical plug is connected to a live, grounded outlet. * A fuse in your home might be blown, or the circuit breaker could be tripped. Try replacing the fuse or resetting the circuit breaker. * The gas supply might not be properly connected or turned on. Refer to the Installation Instructions that came with your range for guidance.
  • D
    Drew BeckerAug 19, 2025
    Why won't all of the burners light on my Samsung NX58K9500WG Ranges?
    • M
      Miranda MurraySep 12, 2025
      If all burners fail to light, it could be due to several reasons: * The power cord might not be properly plugged into the electrical outlet. Ensure the electrical plug is connected to a live, grounded outlet. * A fuse in your home could be blown, or the circuit breaker tripped. Replace the fuse or reset the circuit breaker. * The gas supply may not be properly connected or turned on. Refer to the Installation Instructions that came with your range for guidance.
  • C
    Christopher CarrollAug 22, 2025
    How to fix surface burners that do not light on Samsung NX58K9500WG Ranges?
    • T
      Terry PadillaAug 22, 2025
      If the surface burners on your Samsung Ranges do not light, it could be due to the following reasons: * The control knob is not set properly. Push in the control knob and turn it to the LITE position. * The burner caps are not in place, or the burner base is misaligned. Clean the electrodes, put the burner cap on the burner head, and align the burner base.
  • A
    Amy PenaAug 26, 2025
    How to fix Samsung NX58K9500WG Ranges when surface burners do not light?
    • G
      Gregory GreerAug 26, 2025
      If the surface burners on your Samsung range aren't lighting, try these solutions: * Ensure the control knob is correctly set. Push in the control knob and turn it to the LITE position. * Check the burner caps and alignment. Clean the electrodes, put the burner cap on the burner head, and align the burner base.
  • S
    Shannon DillonAug 28, 2025
    What to do if I smell gas from my Samsung NX58K9500WG?
    • A
      angelawalkerAug 28, 2025
      If you smell gas, there may be a gas leak or the surface burner knob might not be in the OFF position while the burner isn't lit. Immediately evacuate everyone from the room, building, or area. Use a neighbor's phone to call your gas supplier, avoiding the use of your own phone, which could create a spark. Follow the gas supplier's instructions. If you cannot reach them, call the fire department.
  • M
    Mariah TuckerAug 31, 2025
    What to do if surface burner clicks during operation on Samsung Ranges?
    • E
      Elizabeth PattersonAug 31, 2025
      If a surface burner clicks during operation, it's likely that the control knob has been left in the LITE position. After the burner lights, turn the control knob to your desired setting. If the clicking persists, it is recommended to contact a service technician.
  • M
    Mrs. Veronica LindseySep 3, 2025
    Why does the surface burner click during operation on my Samsung NX58K9500WG Ranges?
    • M
      Matthew GallegosSep 3, 2025
      If the surface burner clicks during operation, it might be because the control knob has been left in the LITE position. After the burner lights, turn the control knob to the desired setting. If the clicking continues, it is recommended to contact a service technician.
  • S
    Stephanie Martin PhDSep 6, 2025
    What to do if surface burners light but oven burners do not light on Samsung Ranges?
    • G
      gabrielle97Sep 6, 2025
      If the surface burners light but the oven burners do not, there could be a couple of reasons: * The oven door lock may be turned on. If the display shows a Lock icon, hold the oven door open and press the START/SET button for 3 seconds. The oven will beep, and the Lock icon will turn off. * The Gas Pressure Regulator shut off switch may be in the ‘off’ position. In this case, call a qualified service technician.
  • R
    Ryan TaylorSep 9, 2025
    Why Samsung Ranges burners do not burn evenly?
    • C
      chad71Sep 9, 2025
      Uneven burning of your Samsung range burners can be caused by surface burner components and caps not being assembled correctly and level, or the surface burners may be dirty.
  • A
    Alicia DouglasSep 12, 2025
    Why are the surface burner flames very large or yellow on my Samsung Ranges?
    • W
      wparkerSep 12, 2025
      Very large or yellow surface burner flames indicate that the wrong orifice is assembled. Check the burner orifice size and contact your installer if you have the wrong orifice (LP gas instead of natural gas or natural gas instead of LP gas).

Samsung NX58K9500WG Specifications

General IconGeneral
Oven Capacity5.8 cu. ft.
Cooktop TypeGas
Number of Burners5
Self-CleaningYes
Wi-Fi ConnectivityYes
ColorStainless Steel
Cooktop SurfaceContinuous Grates
ConvectionYes
Burner TypeSealed
Ignition TypeElectronic
Width30 inches
Oven TypeSingle
Warranty1 Year

Related product manuals