Samsung NX58H9500WS - User Manual

Other manuals for Samsung NX58H9500WS

Installation Manual76 pages

Quick Guide3 pages

Questions and Answers

D
Devin GregoryAug 15, 2025
Why won't any of the burners light on my Samsung Ranges?
- K
  Kimberly MartinezAug 16, 2025
  If none of the burners are lighting, it could be due to several reasons: * The power cord may not be properly plugged into the electrical outlet. Ensure the electrical plug is connected to a live, grounded outlet. * A fuse in your home might be blown, or the circuit breaker could be tripped. Try replacing the fuse or resetting the circuit breaker. * The gas supply might not be properly connected or turned on. Refer to the Installation Instructions that came with your range for guidance.
A
Anthony RossAug 19, 2025
Why won't all of the burners light on my Samsung NX58H9500WS Ranges?
- P
  Paul TurnerAug 19, 2025
  If all burners fail to light, it could be due to several reasons: * The power cord might not be properly plugged into the electrical outlet. Ensure the electrical plug is connected to a live, grounded outlet. * A fuse in your home could be blown, or the circuit breaker tripped. Replace the fuse or reset the circuit breaker. * The gas supply may not be properly connected or turned on. Refer to the Installation Instructions that came with your range for guidance.
J
Julie LoganAug 21, 2025
How to fix Samsung NX58H9500WS when surface burners do not light?
- G
  Gary WarrenAug 22, 2025
  If the surface burners on your Samsung range aren't lighting, try these solutions: * Ensure the control knob is correctly set. Push in the control knob and turn it to the LITE position. * Check the burner caps and alignment. Clean the electrodes, put the burner cap on the burner head, and align the burner base.
J
Jamie VazquezAug 25, 2025
What to do if I smell gas from my Samsung NX58H9500WS Ranges?
- M
  mblackwellAug 25, 2025
  If you smell gas, there may be a gas leak, or the surface burner knob might not be in the OFF position while the burner isn't lit. Immediately evacuate everyone from the room, building, or area. Use a neighbor's phone to call your gas supplier, not your own phone, as it could cause a spark. Follow their instructions. If you can't reach the gas supplier, call the fire department.
J
Janice ArnoldAug 27, 2025
Why does the surface burner click during operation on my Samsung NX58H9500WS Ranges?
- B
  barkerlynnAug 27, 2025
  If the surface burner clicks during operation, it might be because the control knob has been left in the LITE position. After the burner lights, turn the control knob to the desired setting. If the clicking continues, it is recommended to contact a service technician.
S
Shawn FernandezAug 30, 2025
What to do if surface burners light but oven burners do not light on Samsung NX58H9500WS?
- R
  Rachel DicksonAug 31, 2025
  If the surface burners light but the oven burners do not, there could be a couple of reasons: * The oven door lock may be turned on. If the display shows a Lock icon, hold the oven door open and press the START/SET button for 3 seconds. The oven will beep, and the Lock icon will turn off. * The Gas Pressure Regulator shut off switch may be in the ‘off’ position. In this case, call a qualified service technician.
B
Benjamin MorenoSep 3, 2025
Why Samsung NX58H9500WS Ranges burners do not burn evenly?
- A
  ashley60Sep 3, 2025
  Uneven burning of your Samsung range burners can be caused by surface burner components and caps not being assembled correctly and level, or the surface burners may be dirty.
F
farrelljoshuaSep 5, 2025
Why are the surface burner flames very large or yellow on my Samsung Ranges?
- C
  Chelsea AvilaSep 6, 2025
  Very large or yellow surface burner flames indicate that the wrong orifice is assembled. Check the burner orifice size and contact your installer if you have the wrong orifice (LP gas instead of natural gas or natural gas instead of LP gas).
T
Thomas ThompsonSep 8, 2025
How to fix surface burners that do not light on Samsung NX58H9500WS?
- K
  Kevin SandovalSep 8, 2025
  If the surface burners on your Samsung Ranges do not light, it could be due to the following reasons: * The control knob is not set properly. Push in the control knob and turn it to the LITE position. * The burner caps are not in place, or the burner base is misaligned. Clean the electrodes, put the burner cap on the burner head, and align the burner base.
J
Jose FordSep 12, 2025
What to do if surface burner clicks during operation on Samsung Ranges?
- L
  Lonnie JohnsonSep 12, 2025
  If a surface burner clicks during operation, it's likely that the control knob has been left in the LITE position. After the burner lights, turn the control knob to your desired setting. If the clicking persists, it is recommended to contact a service technician.

Summary

Safety First

Anti-Tip Device Installation

General Safety Information

Covers important safety, symbols, warnings, and regulatory information.

Specific Safety Areas

Details on fire, gas, electrical, installation, location, oven, and drawer safety.

Control Panel and Basic Functions

Control Panel Operations

Using the Gas Range

Cooktop Operation

Gas Burner Details

Using the Gas Oven

Oven Cooking Modes

Instructions for baking, roasting, broiling, and convection cooking.

Temperature Probe Guide

Cooking Guides and Tips

Maintenance and Cleaning

Cleaning Surfaces and Components

Self-Cleaning Cycle

Instructions for performing the self-cleaning cycle and safety precautions.

Troubleshooting and Support

Common Issues and Solutions

Troubleshooting gas, burner, oven, and self-cleaning problems.

Samsung NX58H9500WS Specifications

General

Type	Freestanding
Fuel Type	Gas
Oven Capacity	5.8 cu. ft.
Cooktop Burners	5
Convection	Yes
Self-Cleaning	Yes
Cooktop Surface	Stainless Steel
Burner Types	Sealed Burners
Color	Stainless Steel