How to fix Samsung NX58H9500W Ranges surface burners that do not light?
C
Carl MoralesAug 21, 2025
If the surface burners on your Samsung range aren't lighting, there are a couple of things you can check:
* Ensure the control knob is properly set by pushing it in and turning it to the LITE position.
* Make sure the burner caps are correctly in place and the burner base is properly aligned. Clean the electrodes if necessary. Put the burner cap on the burner head and align the burner base.
J
Julia FritzAug 22, 2025
Why does my Samsung NX58H9500W Ranges oven smoke so much when broiling?
S
susanmoralesAug 23, 2025
Excessive smoke during broiling in your Samsung oven can occur due to several reasons:
* Meat or food not properly prepared: Cut away excess fat and fatty edges that may curl.
* Improperly positioned top oven rack: Refer to the broiling guide.
* Greasy buildup: Regular cleaning is necessary when broiling frequently.
N
nicole65Aug 25, 2025
What to do if Samsung NX58H9500W Ranges oven will not self-clean?
B
Brandon AlexanderAug 25, 2025
If your Samsung oven isn't self-cleaning, consider the following possibilities:
* Ensure the oven door lock is not engaged. The display will show the Lock icon. Hold the oven door open and press the START/SET button for 3 seconds. The oven will beep and the Lock icon will turn off.
* Make sure the warming drawer is not in use, as the self-clean function won't operate when the warming drawer is on.
* Allow the oven to cool down if it's too hot, and then reset the controls. The door must lock before the self-clean cycle can start.
* Also, ensure the door is completely closed.
J
Jessica BakerAug 27, 2025
Why does my Samsung NX58H9500W surface burner keep clicking?
E
Erin JamesAug 27, 2025
If your Samsung range's surface burner clicks during operation, it might be because the control knob has been left in the LITE position. After the burner lights, turn the control knob to a desired setting. If the burner still clicks, contact a service technician.
R
Richard MaldonadoAug 27, 2025
Why is my Samsung Ranges oven smoking so much during self-clean?
K
Katherine OlsonAug 28, 2025
Excessive smoking during a self-cleaning cycle is normal the first time the oven is cleaned. Wipe up all excessive soiling before starting the self-cleaning cycle. If smoke persists, press the OFF/CLEAR button. Open the windows to clear the smoke from the room. After the oven has cooled and unlocked, wipe up excessive soil and reset the oven for self-cleaning.
B
Brett JonesAug 29, 2025
Why doesn't food bake or roast properly in my Samsung Ranges oven?
I
ian30Aug 29, 2025
If food isn't baking or roasting properly in your Samsung oven, check these potential causes:
* Ensure the correct cooking mode is selected.
* Verify the oven racks are positioned properly for the food you're cooking.
* Confirm you're using the correct cookware of the proper size.
* Remove any aluminum foil from the racks and/or oven bottom.
* Make sure that clock or timers are set correctly.
P
Peggy ShannonAug 30, 2025
Samsung Ranges: what to do if warming drawer will not work?
D
Daniel ThomasAug 31, 2025
If the warming drawer on your Samsung range isn't working, consider the following:
* Ensure the controls are set properly.
* Check if the Self-Clean or Sabbath function is active, as the warming drawer won't operate during these functions. Try again after these functions are completed or cancelled.
* Make sure the oven controls haven't been locked. Unlock the controls and try again.
* Check for a blown fuse or tripped circuit breaker. Replace the fuse or reset the breaker if necessary.
M
Mrs. Sara WhiteSep 1, 2025
What to do if Samsung Ranges oven control beeps and displays a code?
J
James WrightSep 1, 2025
If your Samsung oven control is beeping and displaying an information code, press the OFF/CLEAR button and restart the oven. If the problem continues, disconnect all power to the range for at least 30 seconds and then reconnect the power. If this doesn't resolve the issue, call for service.
J
James SchneiderSep 3, 2025
Why won't my Samsung NX58H9500W Ranges oven door open after self-clean?
A
austin39Sep 3, 2025
The oven door on your Samsung range will remain locked after a self-cleaning cycle until the oven temperature drops below 392 °F.
C
coledeniseSep 4, 2025
How to fix Samsung Ranges burners that do not burn evenly?
K
kennethbarnesSep 4, 2025
Uneven burning on your Samsung range's surface burners can be due to surface burner components and caps not assembled correctly and level. Also, surface burners can be dirty. Clean surface burner components.
To Next Page
General
