Samsung NX58K9850S series User Manual (English)

Other manuals for Samsung NX58K9850S series

Service Manual114 pages

Installation Manual84 pages

Questions and Answers:

A
amber00Sep 13, 2025
Why is there excessive smoking during a self-cleaning cycle on my Samsung NX58K9850S Ranges?
- M
  michael59Sep 13, 2025
  Excessive smoking during the first self-cleaning cycle is normal. The oven will always smoke more the first time it is cleaned. Wipe up all excessive soil before starting the self-cleaning cycle. If smoke persists, press the OFF/CLEAR pad and open the windows to clear the smoke from the room. After the oven has cooled and unlocked, wipe up excessive soil, and then reset the oven for self-cleaning.
D
Daniel LaneAug 25, 2025
What to do if all burners on my Samsung NX58K9850S Ranges do not light?
- M
  Mrs. Linda RhodesAug 25, 2025
  If all burners fail to light, ensure the power cord is properly plugged into a grounded electrical outlet. Also, check if a fuse in your home has blown or if the circuit breaker has tripped; replace the fuse or reset the breaker as needed. Finally, make sure the gas supply is properly connected and turned on.
R
rollinsjaneAug 25, 2025
What to do if the oven will not turn on in my Samsung NX58K9850S Ranges?
- J
  Jordan BowenAug 26, 2025
  If the oven won't turn on, ensure it is fully plugged into a properly grounded electrical outlet. Also, check the fuse in your home; a blown fuse or tripped circuit breaker could be the issue. Replace the fuse or reset the circuit breaker.
R
Rodney DavisAug 27, 2025
Why is my Samsung NX58K9850S oven burner not shutting off?
- J
  jefferywalkerAug 27, 2025
  If the oven burner will not shut off, check if the oven door lock is activated. The display will show a Lock icon. Hold the oven door open and press the START/SET pad for 3 seconds to deactivate it. Alternatively, the Sabbath function may be active. In this case, SAb and the time of day will appear on the display. To turn off the oven only, press the OFF/CLEAR pad. To cancel the Sabbath function, press and hold the Bake and Touch to Wake Up pads simultaneously for 3 seconds.
M
Mrs. Frances BishopAug 27, 2025
What to do if the Samsung NX58K9850S oven sensor resistance is not normal?
- J
  jesuskellerAug 27, 2025
  If the Samsung Ranges oven sensor resistance is not normal, you should: 1. Disconnect the power. 2. Open the back cover. 3. Disconnect the sensor harness from the control. 4. Measure the sensor resistance (it should be 1080 Ohms at room temperature). If there are still issues, replace the oven sensor. Also, check for any damaged terminals or wire harnesses. Check the resistance of the oven sensor connector on the main PCB (it should be around 2850 Ohms).
S
Stephanie CarterSep 12, 2025
What to do if the oven control beeps and displays an information code on my Samsung NX58K9850S Ranges?
- M
  Micheal MaySep 12, 2025
  If the oven control beeps and displays an information code, press the OFF/CLEAR pad, and then restart the oven. If the problem persists, disconnect all power to the range for at least 30 seconds and then reconnect the power. If this does not solve the problem, call for service.
E
emily52Sep 10, 2025
What to do if surface burners light, but oven burners do not light on Samsung NX58K9850S Ranges?
- N
  Nancy HernandezSep 10, 2025
  If surface burners light but oven burners do not light, check if the oven door lock is turned on. The display will show the Lock icon. Hold the oven door open and press the START/SET pad for 3 seconds. The oven will beep and the Lock icon will turn off. If the issue persists, the Gas Pressure Regulator shut off switch may be in the off position, in which case you should call a qualified service technician.
M
Mario HannaSep 12, 2025
Why does my Samsung NX58K9850S Ranges make a crackling or popping sound?
- M
  Marcus NealSep 12, 2025
  A crackling or popping sound is normal. This is the sound of the metal heating and cooling during any cooking or cleaning function.
N
Nicole BauerSep 3, 2025
Why does the surface burner click during operation on my Samsung Ranges?
- A
  Amanda BrownSep 3, 2025
  If a surface burner clicks during operation, it may be because the control knob has been left in the Lite position. After the burner lights, turn the control knob to a desired setting. If the burner still clicks, contact a service technician.
J
jacobstricklandSep 1, 2025
What to do if I smell gas from my Samsung Ranges?
- N
  nshawSep 1, 2025
  If you smell gas, immediately clear the room, building, or area of all occupants. Call your gas supplier from a neighbor’s phone, not your own, to avoid sparks. Follow their instructions. If you cannot reach your gas supplier, call the fire department. Also, ensure the surface burner knob is in the OFF position.