Why does the surface burner click during operation on my Samsung Ranges?
If a surface burner clicks during operation, it may be because the control knob has been left in the Lite position. After the burner lights, turn the control knob to a desired setting. If the burner still clicks, contact a service technician.
Why will my Samsung NX58K9850S oven not turn on?
If the oven will not turn on, ensure the electrical plug is fully inserted into a live, properly grounded outlet. Also, check for blown fuses or tripped circuit breakers in your home and replace or reset them as needed.
What to do if I smell gas from my Samsung Ranges?
If you smell gas, immediately clear the room, building, or area of all occupants. Call your gas supplier from a neighbor’s phone, not your own, to avoid sparks. Follow their instructions. If you cannot reach your gas supplier, call the fire department. Also, ensure the surface burner knob is in the OFF position.
Why is my Samsung Ranges oven smoking excessively during broiling?
Excessive smoke during broiling can occur if meat or food was not properly prepared; cut away excess fat. It can also be caused by an improperly positioned top oven rack. Also, check if the controls are being set properly. Lastly, greasy buildup on oven surfaces can cause smoke; regular cleaning is necessary when broiling frequently.
What to do if the display goes blank on my Samsung NX58K9850S Ranges?
If the display on your Samsung range goes blank, the electrical outlet Ground Fault Interrupter (GFI or GFCI) may have been tripped and needs to be reset. Replace the fuse or reset the circuit breaker.
How to fix surface burners that do not light on Samsung NX58K9850S Ranges?
If the surface burners on your Samsung range do not light, make sure the control knob is pushed in and turned to the Lite position. Also, check that the burner caps are correctly placed and the burner base is properly aligned. Clean the electrodes if necessary.
Why won't all the burners light on my Samsung Ranges?
If all burners fail to light, check the following: * Ensure the power cord is plugged into a live, properly grounded outlet. * Replace any blown fuses or reset tripped circuit breakers in your home. * Refer to the Installation Instructions to ensure the gas supply is properly connected and turned on.
What to do if the Samsung NX58K9850S oven sensor resistance is not normal?
If the Samsung Ranges oven sensor resistance is not normal, you should: 1. Disconnect the power. 2. Open the back cover. 3. Disconnect the sensor harness from the control. 4. Measure the sensor resistance (it should be 1080 Ohms at room temperature). If there are still issues, replace the oven sensor. Also, check for any damaged terminals or wire harnesses. Check the resistance of the oven sensor connector on the main PCB (it should be around 2850 Ohms).
Why is my Samsung NX58K9850S oven burner not shutting off?
If the oven burner will not shut off, check if the oven door lock is activated. The display will show a Lock icon. Hold the oven door open and press the START/SET pad for 3 seconds to deactivate it. Alternatively, the Sabbath function may be active. In this case, SAb and the time of day will appear on the display. To turn off the oven only, press the OFF/CLEAR pad. To cancel the Sabbath function, press and hold the Bake and Touch to Wake Up pads simultaneously for 3 seconds.
What to do if the oven will not turn on in my Samsung NX58K9850S Ranges?
If the oven won't turn on, ensure it is fully plugged into a properly grounded electrical outlet. Also, check the fuse in your home; a blown fuse or tripped circuit breaker could be the issue. Replace the fuse or reset the circuit breaker.
General| Fuel Type | Gas |
|---|---|
| Oven Capacity | 5.8 cu. ft. |
| Number of Burners | 5 |
| Convection | Yes |
| Self-Cleaning | Yes |
| Color | Stainless Steel |
Detailed instructions and warnings for securing the range with the anti-tip device.
Essential warnings for safe appliance operation, including gas and electrical safety.
Guidelines for proper installation, grounding, and selecting a safe operating location.
Specific safety advice for using the cooktop, oven, and storage drawer, including self-cleaning.
Introduction to the range layout, included parts, and key features.
Explanation of the control panel and initial setup like setting the clock and timer.
Instructions for using gas burners, igniting, flame levels, cookware, griddle, and safety.
How to use Single, Twin, Bake, Roast, Broil, Convection, and Temperature Probe modes.
Using Timed Cook, Delay Start, Healthy Cook, and Sabbath modes for specialized cooking.
Steps for cleaning the control panel, surfaces, racks, doors, and burner components.
How to perform the self-cleaning cycle, including preparation and safety precautions.
Solutions for gas safety, burner, oven, and self-cleaning problems.
Information on the limited warranty, coverage period, and terms.
Contact information and resources for warranty service, support, and product registration.
To Next Page
