Samsung NX58J7750SS User Manual (English)

Other manuals for Samsung NX58J7750SS

Installation Manual40 pages

Quick Guide8 pages

Questions and Answers:

K
klangAug 21, 2025
Why won't all the burners light on my Samsung NX58J7750SS Ranges?
- R
  Robert MillerAug 21, 2025
  If all burners fail to light, it could be due to a few reasons: * The power cord might not be properly plugged into the electrical outlet. Ensure it's connected to a live, grounded outlet. * A fuse in your home could be blown, or the circuit breaker tripped. Replace the fuse or reset the breaker. * The gas supply might not be properly connected or turned on. Refer to the Installation Instructions that came with your range.
M
Morgan TuckerAug 22, 2025
Why are my Samsung NX58J7750SS surface burners not lighting?
- S
  Steven VillegasAug 23, 2025
  If the surface burners on your range aren't lighting, it could be due to the following: * The control knob is not set properly. Make sure to push in the control knob and turn it to the LITE position. * The burner caps are not in place, or the burner base is misaligned. Clean the electrodes, put the burner cap on the burner head, and align the burner base.
R
rhodesjohnAug 25, 2025
What to do if my Samsung Ranges oven will not self-clean?
- D
  davidkingAug 25, 2025
  If your oven won't self-clean, there are several possible reasons: * The oven door lock is turned on. The display will show the Lock icon. Hold the oven door open and press the START/SET button for 3 seconds. The oven will beep and the Lock icon will turn off. * The Smart Divider is installed in the oven. Self-clean will not operate with the Smart Divider installed. Remove it from the oven. * The oven is too hot. Let the oven cool down and reset the controls. The self-clean cycle will not lock the oven door if the oven temperature is too hot. The door must lock before the self-clean cycle can start. * The self-cleaning oven controls are not properly set. Reset the self-cleaning oven controls.
D
davilaheatherAug 27, 2025
Why is my Samsung NX58J7750SS Ranges oven burner not shutting off?
- E
  Elizabeth RamirezAug 27, 2025
  If the oven burner won't shut off, it could be due to: * The oven door lock is turned on. The display will show the Lock icon. Hold the oven door open and press the START/SET button for 3 seconds. The oven will beep and the Lock icon will turn off. * The Sabbath function has been activated. SAb and the time of day will show in the display. All other controls and signals will be deactivated. To turn off the oven only, press the OFF/CLEAR button. To cancel the Sabbath function and reactivate the controls and signals, press and hold the Bake and Touch to Wake-Up buttons simultaneously for 3 seconds.
J
James DudleyAug 27, 2025
What does it mean if my Samsung NX58J7750SS Ranges oven control beeps and displays an information code?
- F
  Frederick EspinozaAug 28, 2025
  You have a function information code. Press the OFF/CLEAR button and restart the oven. If the problem persists, disconnect all power to the range for at least 30 seconds and then reconnect the power. If this does not solve the problem, call for service.
J
Johnathan GarciaAug 29, 2025
Why is my Samsung Ranges display blank?
- T
  Timothy HansonAug 29, 2025
  The electrical outlet Ground Fault Interrupter (GFI or GFCI) has been tripped and needs to be reset. Your digital control has been damaged. Replace fuse or reset circuit breaker.
S
Seth ChavezAug 31, 2025
Why do my Samsung NX58J7750SS Ranges surface burners light but oven burners do not light?
- S
  Stephanie GreeneAug 31, 2025
  If the surface burners light but the oven burners do not, it could be due to: * The oven door lock is turned on. The display will show the Lock icon. Hold the oven door open and press the START/SET button for 3 seconds. The oven will beep and the Lock icon will turn off. * Gas Pressure Regulator shut off switch is in the ‘off position. Call a qualified service technician.
M
Michelle VelasquezSep 1, 2025
What to do if I smell gas from my Samsung NX58J7750SS Ranges?
- D
  Dan HensleySep 2, 2025
  If you smell gas, a gas leak may be present, or the surface burner knob may not be in the OFF position while the burner is unlit. Immediately evacuate everyone from the room, building, or area. Use a neighbor's phone to call your gas supplier, not your own, as it could cause a spark. Follow their instructions. If you cannot reach your gas supplier, call the fire department.
K
Katherine GilbertSep 3, 2025
Why are my Samsung NX58J7750SS Ranges oven racks difficult to slide?
- G
  Gary DavisSep 3, 2025
  It is normal. Apply a small amount of vegetable oil to a paper towel and wipe the edges of the oven racks with the paper towel. Note that racks become dull and hard to slide if they are left in the oven during a self-clean cycle.
S
Stephen PalmerSep 5, 2025
Why is my Samsung Ranges oven light not turning on?
- M
  Marissa VanceSep 5, 2025
  If the oven light won't turn on, check these potential causes: * The oven door lock is turned on. The display will show the Lock icon. Hold the oven door open and press the START/SET button for 3 seconds. The oven will beep and the Lock icon will turn off. * The Sabbath function has been activated. SAb and the time of day will show in the display. All other controls and signals will be deactivated. To cancel the Sabbath function and reactivate the light switch and other controls, press and hold the Bake and Touch to Wake-Up buttons simultaneously for 3 seconds. * Loose or burned-out bulb. * The switch operating the oven light needs to be replaced.

Samsung NX58J7750SS Specifications

General

Fuel Type	Gas
Cooktop Type	Gas
Cooktop Surface	Stainless Steel
Number of Burners	5
Oven Capacity	5.8 cu. ft.
Convection	Yes
Self-Cleaning	Yes
Wi-Fi Connectivity	Yes
Color	Stainless Steel
Width	30 inches
Grill	No
Ignition Type	Electronic
Burner Output (BTU)	18, 000 (Power Burner), 5, 000 (Simmer Burner)