Samsung NX58J7750S series User Manual (English)

Other manuals for Samsung NX58J7750S series

Installation Manual80 pages

Quick Guide8 pages

Questions and Answers:

D
Dr. Evan PetersonAug 21, 2025
Why won't all the burners light on my Samsung NX58J7750S Ranges?
- J
  Julie MoodyAug 21, 2025
  If all burners fail to light, it could be due to a few reasons: * The power cord might not be properly plugged into the electrical outlet. Ensure it's connected to a live, grounded outlet. * A fuse in your home could be blown, or the circuit breaker tripped. Replace the fuse or reset the breaker. * The gas supply might not be properly connected or turned on. Refer to the Installation Instructions that came with your range.
A
apattersonAug 22, 2025
Why are my Samsung Ranges surface burners not lighting?
- M
  Matthew PayneAug 23, 2025
  If the surface burners on your range aren't lighting, it could be due to the following: * The control knob is not set properly. Make sure to push in the control knob and turn it to the LITE position. * The burner caps are not in place, or the burner base is misaligned. Clean the electrodes, put the burner cap on the burner head, and align the burner base.
G
Gloria FaulknerAug 25, 2025
What to do if my Samsung Ranges oven will not self-clean?
- K
  Kevin ChapmanAug 25, 2025
  If your oven won't self-clean, there are several possible reasons: * The oven door lock is turned on. The display will show the Lock icon. Hold the oven door open and press the START/SET button for 3 seconds. The oven will beep and the Lock icon will turn off. * The Smart Divider is installed in the oven. Self-clean will not operate with the Smart Divider installed. Remove it from the oven. * The oven is too hot. Let the oven cool down and reset the controls. The self-clean cycle will not lock the oven door if the oven temperature is too hot. The door must lock before the self-clean cycle can start. * The self-cleaning oven controls are not properly set. Reset the self-cleaning oven controls.
J
Jennifer LunaAug 26, 2025
Why is my Samsung NX58J7750S oven burner not shutting off?
- P
  Peter MorrisAug 26, 2025
  If the oven burner won't shut off, it could be due to: * The oven door lock is turned on. The display will show the Lock icon. Hold the oven door open and press the START/SET button for 3 seconds. The oven will beep and the Lock icon will turn off. * The Sabbath function has been activated. SAb and the time of day will show in the display. All other controls and signals will be deactivated. To turn off the oven only, press the OFF/CLEAR button. To cancel the Sabbath function and reactivate the controls and signals, press and hold the Bake and Touch to Wake-Up buttons simultaneously for 3 seconds.
P
Patricia DiazAug 27, 2025
What does it mean if my Samsung NX58J7750S Ranges oven control beeps and displays an information code?
- M
  Mary FoleyAug 28, 2025
  You have a function information code. Press the OFF/CLEAR button and restart the oven. If the problem persists, disconnect all power to the range for at least 30 seconds and then reconnect the power. If this does not solve the problem, call for service.
N
nancy80Aug 29, 2025
Why is my Samsung NX58J7750S display blank?
- K
  Kristen HallAug 29, 2025
  The electrical outlet Ground Fault Interrupter (GFI or GFCI) has been tripped and needs to be reset. Your digital control has been damaged. Replace fuse or reset circuit breaker.
M
Melanie BellAug 31, 2025
Why do my Samsung NX58J7750S surface burners light but oven burners do not light?
- A
  Alicia CarterAug 31, 2025
  If the surface burners light but the oven burners do not, it could be due to: * The oven door lock is turned on. The display will show the Lock icon. Hold the oven door open and press the START/SET button for 3 seconds. The oven will beep and the Lock icon will turn off. * Gas Pressure Regulator shut off switch is in the ‘off position. Call a qualified service technician.
H
hholtSep 2, 2025
What to do if I smell gas from my Samsung NX58J7750S?
- G
  garciajosephSep 2, 2025
  If you smell gas, a gas leak may be present, or the surface burner knob may not be in the OFF position while the burner is unlit. Immediately evacuate everyone from the room, building, or area. Use a neighbor's phone to call your gas supplier, not your own, as it could cause a spark. Follow their instructions. If you cannot reach your gas supplier, call the fire department.
C
Charles HughesSep 3, 2025
Why are my Samsung NX58J7750S Ranges oven racks difficult to slide?
- J
  Jennifer LevySep 3, 2025
  It is normal. Apply a small amount of vegetable oil to a paper towel and wipe the edges of the oven racks with the paper towel. Note that racks become dull and hard to slide if they are left in the oven during a self-clean cycle.
L
lauraperezSep 5, 2025
Why is my Samsung NX58J7750S oven light not turning on?
- C
  Christine GutierrezSep 5, 2025
  If the oven light won't turn on, check these potential causes: * The oven door lock is turned on. The display will show the Lock icon. Hold the oven door open and press the START/SET button for 3 seconds. The oven will beep and the Lock icon will turn off. * The Sabbath function has been activated. SAb and the time of day will show in the display. All other controls and signals will be deactivated. To cancel the Sabbath function and reactivate the light switch and other controls, press and hold the Bake and Touch to Wake-Up buttons simultaneously for 3 seconds. * Loose or burned-out bulb. * The switch operating the oven light needs to be replaced.

Samsung NX58J7750S series Specifications

General

Oven Capacity	5.8 cu. ft.
Cooktop Type	Gas
Number of Burners	5
Convection	Yes
Self-Cleaning	Yes
Color	Stainless Steel
Wi-Fi Connectivity	Yes
Fuel Type	Gas
Type	Slide-In
Burner Types	Simmer
Width	29.875 inches