Connecting a DVD / Biu-Ray Player or Cable Box /
Satellite receiver (Set-Top Box) via Component cables
The rear panel jacks on your TV make it easy to connect a DVD/Blu=Ray Player or Cable Box / Satellite receiver (Set=TopBox)
to your TV.
1. Connect Component Cable between the COMPONENT IN [Y, PB, PR]jacks on the TV and the COMPONENT [Y, PB, PR]jacks on
the DVD / Blu-Ray Player or Cable Box I Satellite receiver(Set-Top Box).
2. Connect Audio Cables between the COMPONENT IN [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the DVD I Blu-
Ray Player or Cable Box / Satellite receiver (Set-Top Box).
"IV Rear Panel
OVO / Blu-Ray Player or Cable Box
/ Satellite receiver
Component video separates the video into Y (Luminance (brightness)), PB(Blue) and PR (Red) for enhanced video quality.
Each DVD I Blu-Ray Player or Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.
When connecting a DVD / Blu-Ray Player or Cable BoxI Satellite receiver (Set-Top Box), match the color of the connection terminal
to the cable.
Connecting a Camcorder
The side and rear panel jacks on your TV make it easy to connect a camcorder to your TV.
[]
Using an HDMI Cable
1. Connectan HDMICablebetweentheHDMIINI(DVI)or 2jackontheTV andthe HDMIjack onthecamcorder,
TV Rear Panel
F...-.--...--.......................................
Camoorder iii ii:
l
_!_ ....._ !_........................................
[_ Each Camcorder has a different back panel configuration.