Samsung PN42B400P3DXZA - Using Your TV as a Computer (PC) Display; Display Modes

I PC Display
UsingYourTV as a Computer (PC) Display
1
Setting Up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on
your PC will probably be different, depending upon your particular version ofWindows and your
particular video card. However, even if your actual screens look different, the same basic set-up
information will apply in almost all cases.
(If not, contact your computer manufacturer or Samsung Dealer.)
1. First, click on Control Panel on the Windows start menu.
2. When the control panel window appears, click on Appearance and Themes and a display
dialog-box will appear.
3. When the control panel window appears, click on Display and a display dialog-box will appear.
4. Navigate to the Settings tab on the display dialog-box. The correct size setting (resolution)
Optimum: PN42B400P3D : 1024x768 pixels, PN50B400P3D : 1360x768 pixels
If a verticalfrequency option exists on your display settings dialog box, the correct value is 60 or
60 Hz. Otherwise, just click OK and exit the dialog box.
Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system
doesn't equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no video.
For the display modes listed below, the screen image has been optimized during manufacturing.
HDMI/DVI input
_e__.u_.on Frequency(kHz) Frequency(Hz)Frequency (MHz) (HN) ---
640 x 350 31.469 70.086 25.175 + / - v" v"
IBM
720x 400 31.469 70.087 28.322 - /+ v" v"
640 x 480 35.000 66.667 30.240 - / - v" v"
MAC .....
832x 624 49.726 74.551 57.284 - / - v- v"
31.469 59.940 25.175 -/- ,/ v"
640x48o 37:86i v, _-
72.809 31.500 - /-
37.500 75.000 31.500 - /- ,/ v"
37.879 60.317 40.000 + / + v" ,/
800x 600 48.077 72.188 50.000 +/+ ,/ v"
VESADMT
46.875 75.000 49.500 +/+ ,/ ,/
48.363 60.004 65.000 - / - v" V"
1024x768 56.476 70.069 75.000 - /- v" v"
60.023 75.029 78.750 +/+ v" v"
1360x768 47.712 60.015 85.500 +/+ v"
720x 576 35.910 59.950 32.750 - /+ ,/ ,/
VESACVT 44.772 59.855 74.500 - /+ ,/
1286x720 ....
56.456 74.777 95.750 - /+ v"
VESAGTF 1280x720 52.500 70.000 89.040 - /+ v"
When using an HDMI/DVI cable connection, you must use the HDMI IN I(DVI) terminal.