Connecting Speakers
1 Remove the screws on the rear of the PDP Monitor.
2 Hang the two “T” shaped hangers
on the square holes on the rear of
the PDP Monitor.
3 Tighten the PDP Monitor and the speaker bracket using the screws removed from the PDP Monitor.
➢
When moving your PDP Monitor, do NOT hold the speaker connected to your PDP Monitor. It may
damage the bracket clamping the speaker and your PDP Monitor together and result in a drop of
your PDP Monitor and a risk of personal damage and injury.
PPM42M5S
PPM42M5H
PPM50M5H PPM63M5H
PPM42M5S
PPM42M5H
PPM50M5H
PPM63M5H
PPM42M5S
PPM42M5H
PPM50M5H PPM63M5H
p
English - 13
➢
Speakers are optional. You have to purchase the speakers
additionally.
BN68-00848A-00Eng_0404 4/4/05 3:57 PM Page 13
To Next Page
Loading...
