➢
Control Panel
Front of the PDP Monitor
➢
The actual configuration of your PDP Monitor may be different,
depending on your model.
a)
b
c)
➢
d
➢
e)
➢
English - 6
➢
◆ You can use the
SEL ,
buttons to switch on the PDP Monitor when it is in standby
mode depending on the model.
◆ The VOL
-
,
+ and
SEL ,
buttons have the same function as the ▲/▼/œ/√ buttons
on the remote control.
◆ If the remote control no longer works or you have misplaced it, you can use the controls
on the panel of the PDP Monitor.
➢
➢
c
SOURCE
- Select the external input source.
- Store your settings in the menu.
- When the Main menu is displayed on screen,
the Main menu is not operated with source key.
MENU
Display the on-screen menu.
-
VOL +
- Adjust the volume.
- Adjust an option value respectively.
(VOL + : Enter to the selected menu.)
SEL
Control the cursor in the menu.
I /
Press to turn the PDP Monitor on and off.
a
Power Indicator
- Power Off; Black
- Power On; Green
b
Remote Control Sensor
Aim the remote control towards this spot on the
PDP Monitor.
c
Speaker Speaker
a b c
BN68-00848A-00Eng_0404 4/4/05 3:57 PM Page 6
To Next Page
Loading...
