Samsung RB215LABP - 10-2) Temp Control Function

26
Temp Control &Operation Functions
1) Freezer Temperature Control
1-1) The temperature will be selected between 8  and -14  at an interval of 2  by pressing one button.
1-2) The temperature will be selected in the following order.
(-2 -4 -6 -8 -10 -12 -14 8 6 4 2 0 )
1-3) When power is on or there is a power failure,it will display the real temperature.
(It displays the real temperature when a function button is pressed)
1-4) The STD temperature for each step is as follows.(Based on 1/3H copper bar)
1-5) When the Freezer button is pressed,7-SEG will be changed immediately.But, its function will go into
operation in 10 seconds.
 When the Freezer button is pressed,the current set temp will be displayed.And, when the button is pressed
again within 5 seconds,it will carry out the following 1-2)and when there is no button press,it will go back to
the previous display.
10-1) DISPLAY DESIGN
10-2) Temp Control Function
Step
Temp
1
8
2
6
3
4
4
2
5
0
6
-2
7
-4
8
-6
9
-8
10
-10
11
-12
12
-14