Samsung RF265AA - Adjusting the Freezer Drawer Level; Freezer Drawer Slope Adjustment

ADJUSTING THE FREEZER DRAWER LEVEL
Adjustment part
@
Freezer Drawer
1. Locate the height-adjuster (_) in the freezer drawer.
Unscrew the four phillips screws ({3_) slightly to loosen the door.
sc:_:>wd:w:u"
3. Find the best level to align the door's _:se
ilii!_
CASE) The slope is about 2mm (0.08inch) as shown below.
SlopeI_
s •
Reference __
plane
[:::::::::::::::s
- Rotate down the adjuster-face with +2.0 number to reduce
the door slope.
- The number of the adjuster to rotate depends on the slope.
,,,_ After adjustment, tighten the screws ({3_)&(_})in reverse order.
Setting Up 15