Samsung RF265AA - Removing the Freezer Drawer Accessories

Operati g the SAMSUNG
Door RefriGerator
French
REMOVING THE FREEZER ACCESSORIES
1. Tilting Pocket
/
To remove - Pull the brackets((_) upward until you hear a
clicking sound and remove the pocket
"4
To replace - Hook the ends of the pocket into both brackets
((_) and push down until it locks into place.
i
2. Pull Out Drawer
To remove - Pull the drawer out to full extension.
Remove both side knobs((_).
Tilt up rear of drawer and lift straight out.
To replace -
Pull both rails out to full extension.
Place the drawer onto the rails and hook
supports into slots((_})located on the side of
each drawer. Replace the side knobs and push
the drawer back into place.
WARNING (}S #:" :: ,_ /0 k( } /}'_@1 'iV;:_ t.
3. Freezer Drawer Bin
To remove the drawer - Pull drawer out to full extension.
Tilt up the rear of the bin and lift it
out to remove.
To replace the drawer - Place the bin into the rail
assembly.
To remove the divider - Pull the divider straight up.
To replace the divider - Hook the top corners of divider
over the hole of the bin.