ADJUSTING THE DOORS
Now that the doors are back on the Refrigerator, you want to make sure the Refrigerator is level so that you can
make final adjustments. If the Refrigerator is not level, it will not be possible to get the doors perfectly even.
When the Left door is lower than the Right door.
Insert a flat-blade screwdriver into a notch on the left control lever, turn it clockwise or counter-clockwise
to level the left door.
When the Left door is higher than the Right door.
Insert a flat-blade screwdriver into a notch on the right control lever, turn it clockwise or counter-clockwise
to level the right door.
We do not recommend making small adjustments with the control lever. Instead, refer to the next page for the
best way to make minor adjustments to the doors.
ControlLever
Screwdriver
Screwdriver
ControlLever
ADJUSTING THE SUPPORT FOR EXTENSION SHELF(RF26V)
1
2
1. Remove the extension shelf.
2. Press the
1
hook and lower
down the
2
movable supporter.
3. Hang the extension shelf at the
lower position.
To Next Page
Loading...
