Samsung RMC30D1 - Scheduling Auto Channel Display; Setting Automatic Channel Display

17
Touch Control
Scheduling Auto Channel Display
You can set a desired channel to be displayed automatically at the intended time. Set
the current time fi rst to use this function.
1
Tab <Schedule>. The Schedule Manager screen will
be displayed.
2
Tab The Timer Viewing screen appears.
3
Touch to set the Antenna, Channel, Repeat or Start
Time.
• <Antenna>: Select <Air> or <Cable>.
• <Channel>: Select the desired channel.
• <Repeat>: Select <Once>, <Manual>, <Sat~Sun>,
<Mon~Fri> or <Everyday> to set at your convenience.
If you select <Manual>, you can set the day you want.
The
c
mark indicates the date is selected.
• <Date>: You can set desired date.
(It is available when you select <Once> in
<Repeat>.)
• <Start Time>: You can set start time you want.
Only memorized channels can be reserved.
4
Tap <OK> to complete the scheduling.
Channel Schedule
Booking list
Today ProgramTitle
Today ProgramTitle
06/18 ProgramTitle
06/19 ProgramTitle
06/19 ProgramTitle
[RMC30D1_ZA]BN68-03328B-00L03.indb 17 2011-01-11 오후 3:40:21