Turn the water filter 1/2 turn counter-
clockwise and pull it down.
To install the filter, slowly turn the water
filter clockwise to align with the printing
mark on the cover, locking the filter in
position.
Disassemble the Cover-Lamp by pulling
the hook.
Disengage the housing connector.
Disengage the housing connector.
Insert a flat-blade screwdriver into the
slot and disassemble the Lamp
Cover(Low) by lifting the screwdriver
up gently.
Be careful not to damage the lamp.
PART NAME DESCRIPTION
Water Filter
LED
(Front)
LED
Lamp
(Low)
FIGURE
21
DISASSEMBLY & REASSEMBLY
To Next Page
Loading...
