35
DISASSEMBLY & REASSEMBLY
3-14) PBA Compartment
Pull the refrigerator forward to have
enough space to work at the rear side of
the appliance.
① Unscrew the 2 screws of the PBA
cover.
② Disengage all housing connectors
connected with Main PBA.
Remove the Main PBA while lifting the
hook up.(Refer to the picture)
Remove the 6 screws of the
Compressor Cover.
Remove the housing cover and
disengage the housing connector.
(Refer to the picture)
① Unscrew the 7 screws of the PBA
Cover.
② Pull out the Inverter PBA Case.
PART NAME DESCRIPTION
Main PBA
Inverter
PBA
FIGURE
To Next Page
Loading...
