26
DISASSEMBLY & REASSEMBLY
3-7) Coolselect Zone
After disassembling the top shelf of the
Coolselect Zone, remove 2 screws as
shown.
Pull the Coolselect Zone out to the
front side and then disengage the
connector.
Disassemble the Cover LED at the
bottom of Coolselect Zone with small
flat-blade screwdriver.
Disassemble photosynthesis LED with
pressing the hook and then disengage
the connector.
PART NAME DESCRIPTION
Coolselect
Zone
FIGURE
To Next Page
Loading...
