43
DISASSEMBLY & REASSEMBLY
3-19) Water Pipe
Unscrew a screw by turning counter-
clockwise.
Insert a flat-blade screwdriver into the
slot and disassemble the Cap-door
Cover by lifting up the screwdriver
gently.
Unscrew a screw by turning counter-
clockwise.
Take off the Seal carefully for reuse.
Disconnect the housing
connector(Heater) by gently pulling them
apart.
Remove the Pipe Assy by turning the
nut with pliers.
PART NAME DESCRIPTION
Water Pipe
FIGURE
To Next Page
Loading...
