Samsung RSG5K series - 3-2) Home Bar

3-2) Home Bar
19
DISASSEMBLY & REASSEMBLY
Disassemble the Cap Damper by
inserting a flat-blade screwdriver into the
slot and lifting it up.
Remove a screw and a washer.
Disassemble the Cover-Latch by
inserting a flat-blade screwdriver into the
slot and pulling it gently.
① Remove the shaft.
② Disassemble the Oil-Damper by lifting
it up.
Remove the Home-bar by pulling it out
while inserting a flat-blade screwdriver
into the hole and pulling out the shaft
as shown.
PART NAME DESCRIPTION
Home bar
Door
Oil Damper
Latch
FIGURE
All manuals and user guides at all-guides.com