Samsung RSG5K series - 3-18) Handle

41
DISASSEMBLY & REASSEMBLY
3-18) Handle
Handle Assemblies are located on the
front of the refrigerator door.
Insert the small flat-head driver to the
hole at the bottom of Cap support
handle and pull the handle assembly out
to the front side with turning driver to one
side.
Turn the handle assembly though 90
degrees to allow access to the bottom
fixing position.
Unscrew 4 screws to disassemble Cap
support handle and Support handle.
Pull the Support handle out using hex
wrench as shown or flat-head driver
pushing the back side.
① Remove the Handle by lifting it up.
② Unscrew 4 screws to disassemble the
Support handle.
PART NAME DESCRIPTION
Handle
(Model:RSG
5*U*)
Handle
(Model:RSG
257AA*)
FIGURE
All manuals and user guides at all-guides.com
all-guides.com