31
DISASSEMBLY & REASSEMBLY
31
① Insert a flat-blade screwdriver into the
slot and turn the screwdriver gently.
Be careful not to damage the lamp.
② Pull out the Lamp Cover.
Disengage the housing connector of the
Lamp
Remove the 4 screws and disassemble
the Multi Duct.
PART NAME DESCRIPTION
Multi Duct
(Freezer)
FIGURE
3-12) Door
Open both the Freezer and Fridge
Doors and then take off the Leg Cover
by turning the 3 screws counter-
clockwise.
PART NAME DESCRIPTION
Door
FIGURE
Disengage the housing connector of the
Sensor(the left one of the two).
Ice Duct
To Next Page
Loading...
