Samsung S24A40 Series

23
Tidying Up the Connected Cables
Tilt the display, as shown in the figure. Rotate the product to the highest vertical position. Connect the corresponding cables.
Rotate the product to the horizontal
position.
Pull the right side of the HOLDER-STAND CABLE
to remove from the stand. The left side of the
HOLDER-STAND CABLE can be damaged when
pulled forcibly.
Put both cables in the cable holder on the
stand (HOLDER-STAND CABLE) to organise
the cables, as shown in the figure. Assembly
is complete.
1
5
6
2
3
4