Samsung S24A40 Series

9
Chapter 02
Preparations
Installation
Attaching the Stand
―
Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
―
Disassembly is the reverse order of assembly.
Insert the stand base into the stand
in the direction of the arrow. Fasten
the screw tightly (using a screwdriver
or coin) into the bottom of the stand
base.
After installing the stand, place the
product upright.
Stand up the monitor as
shown in the figure.
Caution
Do not arbitrarily remove the panel film.
If not observed, the warranty service may
be restricted.
4
Push the assembled stand into the main body in the direction of the arrow as
shown in the figure.
x 1
2 3
1