46
Screen Setup
3
3 Screen Setup
When the external input is connected through DVI/HDMI/DP and PC/AV Mode
is set to AV,
Bright has four automatic picture settings (Dynamic, Standard, Movie and Custom) that are
preset at the factory. You can activate either Dynamic, Standard, Movie or Custom. You can
select Custom which automatically recalls your personalized picture settings.
z Dynamic: Select this mode to view a sharper image than in Standard mode.
z Standard: Select this mode when the surroundings are bright. This also provides a sharp
image.
z Movie: Select this mode when the surroundings are dark. This will save power and reduce eye
fatigue.
z Custom: Select this mode when you want to adjust the image according to your preferences.
4 Press [ ] to move to the option you want and press [ ].
5 The selected option will be applied.
To Next Page
Loading...
