52
4 Screen Adjustment
4
Screen Adjustment
4.1 Image Size
Change the picture size.
This menu is not available when PIP/PBP Mode is set to On and the Size is set to (PBP Mode).
4.1.1 Changing the Image Size
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to
display the corresponding menu screen.
2 Press [ ] to move to Screen and press [ ] on the product.
3 Press [ ] to move to Image Size and press [ ] on the product.
The following screen will appear.
z Auto: Display the picture according to the aspect ratio of the input source.
z Wide: Display the picture in full screen regardless of the aspect ratio of the input source.
z 4:3: Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts.
z 16:9: Display the picture with an aspect ratio of 16:9.
z Screen Fit: Display the picture with the original aspect ratio without cutting off.
z Changing the screen size is available when the following conditions are satisfied.
z The function may not be supported depending on the ports provided with the product.
In PC mode
In AV mode
To Next Page
Loading...
