EasyManua.ls Logo

Samsung S49CG95 E Series - Advanced Connections (DP, Audio, USB Hub)

Samsung S49CG95 E Series
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
Connection Using an DP Cable
It is recommended to use the DP cable provided as an accessory. If not provided, be sure to use a DP cable of 1.5
m or below.
Use a VESA certified DP 1.2 cable or higher and its gender.
Connecting to headphones or earphones
Use headphones or earphones when activating sound with an HDMI-HDMI or DP cable.
The headphones or earphones jack supports only the 3 conductor tip-ring-sleeve (TRS) type.
Connecting the Product to a PC as a USB HUB
Using the product as a hub, connect and use various source devices with the product at a time.
Port names and the number of ports may differ, depending on the model.
To detect and start a USB device faster, connect the USB device to the
, port on the product.
The read/write rate will be affected by the USB device and your PC.
For USB-related problems caused by OS, drive programmes or software, please contact relevant suppliers.
With the launch of various USB devices on the market, we cannot guarantee that our products are matched
with all USB devices.
For an external mass-storage HDD requiring external power supply, be sure to connect it to a power source.
The company is not liable for problems or damages to an external device caused by using an unauthorised
cable for the connection.
Some products do not follow the USB standard, and it may cause a malfunction of the device.
It is recommended that users use USB devices of 5V/0.5A or lower.

Related product manuals