ENGLISH
Basic Recording
3939
Making your First Recording
1. Connect a power source to the
Camcorder. (see page 20)
(A Battery pack or a AC Power
adapter) Insert a cassette.
(see page 36)
2. Remove the Lens cover.
3. Set the Power switch to
CAMERA.
■ Open the LCD screen.
■ Set the Mode switch to TAPE.
(SC-D353/D354/D355 only)
Make sure that STBY is
displayed.
■ If the write protection tab of the cassette is open(set to save),
STOP and Protection ! will be displayed. Release the write
protection tab to record.
■ Make sure the image you want to record appears on the LCD
screen or Viewfinder.
■ Make sure the battery level indicates that there is enough
remaining power for your expected recording time.
4. To start recording, press the Start/Stop button.
■ REC ● is displayed on the LCD screen.
To stop recording, press the Start/Stop button again.
■ STBY is displayed on the LCD screen.
[ Note ]
Detach the Battery pack when you are finished recording to prevent
unnecessary battery power consumption.
1. ( 20 )
( )
(
36 )
2.
3. CAMERA
( )
■
■ TAPE
.
(
SC-D353/D354/D355
)
STBY
■
, STOP
Protection! ,
■
■
4. , Start/Stop( )
■ REC ● ( )
, Start/Stop( )
■ STBY
,
4
1
3
2
√
√
To Next Page
Loading...
