COLOR CCD CAMERA User Guide
30
Operating Your Camera
You can display pictures in color or in black and white.
1. When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the Function
Setup button so that the arrow indicates ‘DAY/NIGHT’.
DAY/NIGHT
2.
Select a desired mode using the Function Setup
button
according to the picture display you want.
AUTO : The mode is switched to ’Color‘ in a normal environment, but switches to ’B/W‘ mode
when ambient illumination is low. To set up the switching time for AUTO mode, press
the Function Setup
button
. You can turn on or off the burst signal on
B/W mode.
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.BACKLIGHT OFF
5.SSNR3 ON
6.DAY/NIGHT AUTO
- DURATION : You can select the day/night switching point.
- DWELL TIME : You can select day/night switching delay time from.
Ą3s, 5s, 7s, 10s, 15s, 20s, 30s, 40, 60s
1
2
* The day/night switching point of the camera can be adjusted.
Color
➞
B/W B/W
➞
Color
Early
2.5 lux 5 lux
Late
1 lux 7 lux
EXTERN : Ground to the grounding terminal to allow automatic switching between COLOR
and B/W (Black/White).
To Next Page
Loading...
