ode
ress
• When using a Video Auto Iris Lens, if you set the lens level to low, automatic switching
between Color and Black & White may not occur.
• If the GAIN of EXPOSURE menu is set to OFF, AUTO mode is not available to select.
• When using an external input, Connect the D & N Input Port to the Ground Terminal.
Notes
1. When the SETUP menu screen is displayed, select ‘PROFILE’ by using the Function Setup
button so that the arrow indicates ‘PROFILE’.
PROFILE
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.BACKLIGHT OFF
5.SSNR3 ON
6.DAY/NIGHT AUTO
7.PROFILE
BASIC
8.SPECIAL
9.EXIT SAVE
2.
Select a desired mode using the Function Setup button according to the picture display you want.
BASIC : The most common environment is set to meet.
DAYNIGHT : It will be set automatically so it optimizes to the day or night conditions,
respectively.
BACKLIGHT : It will be set automatically so you can distinguish the object from the
background in a severe backlighting scene.
ITS : It will be set automatically so you can easily check the traffic conditions.
COLOR : The picture is always displayed in color.
B/W : The picture is always displayed in black and white.
You can turn on or off the burst signal on B/W mode.
To Next Page
Loading...
