Samsung SCD-2020 - Backlight Compensation Details; SSNR3 (Samsung Super Noise Reduction)

COLOR DOME CAMERA User Guide
22
COLOR DOME CAMERA User Guide
23
MAIN SETUP
1.LENS SHADE ON
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR
OFF
5.BACKLIGHT OFF
6.SSNR3 ON
7.DAY/NIGHT COLOR
Operating Your Camera
OFF : Not being used

HLC (High Light Compensation) :
If the scene contains extremely bright light areas such as; from car headlight, the
light can mask out much of the on-screen detail.
- LEVEL : Adjust level of the HLC function.
- LIMIT : Enable to change the operating condition.
- MASK COLOR/TONE : Change the color / brightness of the masking area.
(Black, Red, Blue, Cyan, Magenta)
- TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced.
3. Select a desired mode using the Function Setup switch.
Select ‘BLC’ to adjust the area to be
enhanced then adjust the level.
HLC : Enable the user to change the level,
limit, mask color/tone and area.
•BecausetherecanbeadifferenceintheeffectivenessofHLCaccordingtotheamountof
lightareainthescreen,optimizetheinstallationangleforthebestHLCperformance.
•When dark,theHLCisonlyactivatedwhenabrightlightexceedingaspecificsize. (In
NIGHTONLYmode.)
•TheHLCisnotactivatedindaylightorwhenbrightlightisnotpresentatnight.(InNIGHT
ONLYmode.)
•WhenHLCfunctionisused,D-ZOOMandDISfunctionsarenotactivated.
Notes
- LEVEL : Adjust level of the BLC function.
- TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced.
This function reduces the background noise in a low luminance environment.
1. When the SETUP menu screen is displayed, select 'SSNR3' by using the Function
Setup switch so that the arrow indicates 'SSNR3' .
SSNR3
2. Select a desired mode using the Function Setup switch.

OFF : Deactivates SSNR3. Noise is not reduced.

ON : Activates SSNR3 so that noise is reduced.
3. Set the SSNR3 mode to ‘ON’ and press the Function Setup switch. Then you can adjust
the noise reduction level.
•YoucannotsettheSSNR3to‘ON’or‘OFF’whentheAGCmodeoftheEXPOSUREmenuis
‘OFF’.
•WhenadjustingthenoisereductionlevelintheSSNR3mode,rememberthatthehigher
the level set, the more the noise level will be reduced, as will the brightness of the image.
Notes