Samsung SCD-2020 - Menu Setup Navigation; Exposure Settings

COLOR DOME CAMERA User Guide
16
COLOR DOME CAMERA User Guide
17
MAIN SETUP
1.LENS SHADE ON
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR
OFF
5.BACKLIGHT OFF
6.SSNR3 ON
7.DAY/NIGHT COLOR
8.SPECIAL
9.EXIT SAVE
MAIN SETUP
1.LENS SHADE ON
2.EXPOSURE
3.WHITE BAL ATW
MAIN SETUP
1.LENS SHADE ON
2.EXPOSURE
FunctionSetupswitch
Menu Setup
Use the Function Setup switch within the camera.
1. Press the Function Setup switch.
• Main setup menu is displayed on the monitor screen.
2. Select a desired function using the Function Setup switch.
• Place the cursor over a desired item.
3. Set up a selected item by using the Function Setup switch.
4. To finish the setting, select ‘EXIT’ and press the Function Setup switch.
Selectthefunctionby
moving up or down direction
of function setup switch.
Changethestatusby
moving right or left
direction of function
setup switch.
•Anitemwiththe icon also has sub menus. To select a sub menu, select an item with the icon
andpresstheFunctionSetupswitch.
•Anitemwiththe---iconisunavailableduetofunctionsettings.
Notes
Operating Your Camera
- OFF : LENS SHADE NOT IN USE
- ON : LENS SHADE IN USE
- EFL : You can choose Effective Focal length of lens.
(2.8mm, 3.0mm, 3.7mm, 6.0mm, 8.0mm)
- Default setting value of EFL
· SCD-2020N/P : 3.7mm
· SCD-2040N/P : 8.0mm
· SCD-2021N/P : 3.7mm
- SHADE GAIN : Please adjust brightness gain on the
fringe of monitor.
1. When the SETUP menu screen is displayed, select 'EXPOSURE' by using the Function
Setup switch so that the arrow indicates 'EXPOSURE'.
2. Select a desired mode using the Function Setup switch.
•ChangeEFLonlywhenyouchangelenses.
•Applicablelenses:F2.0,EFL=2.8mm,3.0mm,3.7mm,6.0mm,8.0mm.
• ThebiggerSHADEGAINcanmakethebrighterfringeareabutalsothemoreimagedistortionandnoise.
Notes
EXPOSURE
LENS SHADE diminishes brightness contrast to obtain balanced view in the monitor.
LENS SHADE