[ ENGLISH
Notes and Safety Instructions
- Make sure that the battery pack is fully charged before starting to record.
- To preserve battery power,keep your camcorder turned off when you arenot
operating it.
- If yourcamcerder is in CAMERA mede, and it isleft in STBY mode without
being operated for more than 5 minuteswith a tape installed, it will
automaticallyturn itself off to protect against unnecessary battery discharge.
- Make sure that the battery pack is fitted firmly into place.
Dropping the battery pack may damage it.
- A brand new battery pack is not charged.
Before using the battery pack, you need to charge it completely.
- It is a good ideato use the viewfinder rather than the LCD when making long
recordings, becausethe LCD uses up more battery power.
- To ensurenormal recording and a clear picture, clean the video heads regularly.If a square block-shape distorts playback,
or only a blue screen is displayed,the video heads may be dirty. If this happens,clean the video heads with a dry type
cleaning cassette.
- Do not use a wet-type cleaning cassette. It may damage the video heads.
,A
To Next Page
Loading...
