Advanced Recordin l
+ CLOCK setup works in CAMERA, PLAYER,MREC and MPLAY modes.
4' The DATE/TIMEis automatically recorded onto a tape,
Before recording, please set the DATE/TIME
1, Press the MENU button.
• The menu listwill appear.
2, Turn the MENU DIALto highlight INITIAL and pressthe ENTER button,
3, Use the MENU DIAL to select CLOCK SET from the submenu.
4, Press the ENTER button to enter SETTING mode,
• A blinking item indicates the item to be changed.The year will blink first.
5, Using the MENU DIAL, change the year setting,
6, Press the ENTER button.
• The month will blink.
7. Using the MENU DIAL. change the month setting.
8. Press the ENTER button.
• The day will blink.
9. You can setthe day,hour and minute following the same procedure for setting the year and
month.
10.Press the ENTER button after setting the minutes.
• The word COMPLETE! will appear, and a few seconds later,the menu screen will
automaticallyreturn to the sub menu.
11.To exit. press the MENU button.
[ENGLISH]
To Next Page
Loading...
