Playback
4. You can connect your camcorderto a TV through a VCR.
[ENGLISH 1
1. Connect the camcorder and VCR with theAudioA/ideo cable.
• The yellow plug : Video
• The white plug : Audio(L)
• The red plug : Audio(R) - STEREO only
2. Connect a TV to the VCR.
3. Set the power switch on the camcorder to PLAYER mode.
4. Turn on both the TV and VCR.
• Set the input selector on the VCR to LINE.
• Select the channel reservedfor yourVCR on the TV set.
5. Play the tape back.
4. You can playthe recorded tape in PLAYER mode.
1. Connect a power source and set the powerswitch to PLAYER mode.
2. Insert the tape youwish to play back.
3. Using the _ (FF) and 44 (REW) buttons, find the first position
you wish to play back.
4. Pressthe I"/II(PLAY/STILL) button.
• The imagesyou recordedwill appear on the TV after a few seconds.
• If a tape reaches its end while being played back, the tape will rewind automatically.
• The playback mode (SP/LP) is selected automatically.
To Next Page
Loading...
