USB interface
[ENGLISH I
1. Connect a USB cable to the USB port on the PC.
2. Connect the other end of the USB cable intothe proper terminal on the camcorder.(USB jack)
After completingthe data transmission,you must disconnect the cable in the following way:
1. Select the removable disc icon and click the right mouse button to select [Eject].
2. Select [Confirm] and disconnect the USB cable when the Windows Splash screen appears.
• If you disconnect the USB cable from the PC or the camcorder while transferring,the data transmissionwill stop and the
data may be damaged.
• If you connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable along with other USB
devices, the camcorder may not work properly.
- If this occurs, removeall USB devices from the PC and reconnect the camcorder.
To Next Page
Loading...
