[ ENGLISH ]
Maintenance
At the end of a recording you must remove the power source.
When recording with a Lithium Ion Battery Pack,leaving the pack on the camcorder can reduce the life span of the battery.
Hence, it should be removedfrom the camcorder.
1. Slide the TAPEOPEN/EJECT switch inthe direction ofthe arrow.
• Opening the cassette door ejects the tape automatically.
• Please wait while the tape is completely ejected.
2. After removingthe tape, close the door and store the camcorder in a dust free
environment.
• Dust and other foreign materials can cause square-shaped noise or jerky images.
3. Set the powerswitch to the OFF mode.
4. Disconnect the powersource or remove the Lithium Ion Battery Pack.
• Hold down the BATTERYRELEASE button and slide the battery pack
in the direction of the arrow.
A
To Next Page
Loading...
