94
Viewing your Videos
After you take a video, you can access various options from
the Image Viewer. The Image Viewer uses your Gallery and
the Video Player. For more information, refer to “Gallery” on
page 86. Also, see“Video Player” on page 84.
Timer
: allows you to set a timer for how long to wait
before taking a video. Options include: Off, 2 sec, 5 sec,
and 10 sec.
Effects
: allows you to change the color tone or apply
special effects to the photo. Options include: None,
Negative, Black and white, Sepia, Washed out, Cold
vintage, Warm vintage, Posterize, Solarize, Blue point,
Green point, and Red-yellow point.
Resolution
: allows you to set the image size to either:
1920x1080, 1280x720, 720x480, 640x480, or
320x240.
Settings: (continued)
White balance
: allows you to set this option to one of the
following choices: Auto, Daylight, Cloudy,
Incandescent, or Fluorescent.
Anti-Shake
: reduces image blur due to the movement
of the subject of the video or hand movement.
Guidelines
: allows you to turn the guidelines On or Off.
Video quality
: allows you to set the image quality to:
Superfine, Fine, or Normal.
Storage
: allows you to configure the default storage
location for images or videos as either Phone or
Memory card (if inserted).
Reset
: allows you to reset all camera or camcorder
settings to the default values.
Image viewer
: allows you to access the Image viewer
and the various viewing options for a selected video.
Image viewer options are described in the following
section. The last video you took, displays as a
thumbnail in the Image viewer icon.
DRAFT - Internal Use Only
DRAFT - Internal Use Only
To Next Page
Loading...
