124
VPN
Set up and manage Virtual Private Networks (VPNs). For
more information about using VPNs, see “VPN” on page 155
Adding a VPN
1. Set a screen unlock pattern, PIN, or password before
using credential storage.
2. From the Home screen, touch
Menu
➔
Settings
➔
More settings
➔
VPN
.
3. Touch
Add VPN network
to set up a connection to a
VPN, using the following settings:
•Name
: Enter a name for the VPN connection.
•Type
: Choose the type of VPN from the pull-down menu.
• Server address
: Enter the IP address of the VPN server.
• PPP encryption (MPPE)
: Touch to enable or disable
encryption.
• Show advanced options
: Touch to show more options.
Available options depend on the type of VPN you are adding.
Note:
You must enable at least Pattern security before setting
up a VPN. If you have not yet enabled security, you’ll be
prompted to do so the first time you launch VPN
settings.
Sound Settings
Sound
From the Home screen, touch
Menu
➔
Settings
➔
Sound
. The
Sound
menu displays.
Sound Profiles
Use Silent modes to temporarily silence the sounds your
phone makes, except for media playback and alarms, or
replace them with vibration.
1. From the Home screen, touch
Menu
➔
Settings
➔
Sound
➔
Sound profiles
.
2. Select a profile:
•Sound
: Use your sound settings.
•Vibrate
: Enable Vibrate mode, to replace sounds with vibration.
You can also enable Vibrate mode by pressing the Volume Key
down from the Home screen, by pressing and holding the # key
on the Phone keypad, or from the Notifications panel.
DRAFT - Internal Use Only
DRAFT - Internal Use Only
To Next Page
Loading...
