Changing Your Settings 141
Voice Commands for Applications
This setting activates voice commands to control your
device.
1. From the Home screen, tap ➔
Settings
➔
More
settings
(System) ➔
Language and input
.
2. Tap the Voice cmd for apps OFF/ON toggle to use voice
commands in order to control the device.
Voice Settings
This menu allows you to set the speech settings for Voice
input.
1. From the Home screen, tap ➔
Settings
➔
Voice
.
2. Tap
S Voice settings
to access the settings associated
with the S Voice application.
3. Tap
Voice recognizer
and select either
Google
or
Samsung powered by Vlingo
as your Voice recognition
engine.
4. Tap
Voice search
to configure:
• Language
: Choose a language for your voice input.
• SafeSearch
: Set the sensitivity for filtering of explicit images
from the results of your voice-input Google searches.
• Block offensive words
: Enable or disable blocking of
recognized offensive words from the results of your voice-input
Google searches.
• Hotword detection
: Enable to being able to launch voice
search by saying the word “Google”.
• Download offline speech recognition
: Enables voice input
while offline.
5. Tap
Text-to-speech output
and select
Google Text-to-
speech Engine
or
Samsung TTS
.
6. Tap next to the preferred TTS engine configure the
following settings:
• Language
: allows you to set the language for spoken text.
• Settings for Google Text-to-speech Engine
: allows you to
view Open Source Licenses.
• Install voice data
: allows you to install voice data for speech
synthesis.
7. From the
Text-to speech output
screen, scroll down to
access the following options:
• Speech rate
: Set the speed at which the text is spoken.
• Listen to an example
: Play a sample of speech synthesis
(available if voice data is installed).
DRAFT - Internal Use Only
DRAFT - Internal Use Only
To Next Page
Loading...
