Changing Your Settings 123
3. Touch
S Beam
to turn S Beam On, or
touch
SBeam
to turn S Beam Off.
Wi-Fi Direct
Wi-Fi Direct allows devices to connect to each other directly
via Wi-Fi, without a Wi-Fi network or hotspot, and without
having to set up the connection. For example, some printers
support Wi-Fi Direct, and you could print from your phone via
Wi-Fi Direct.
Turning Wi-Fi Direct On or Off
1. From the Home screen, touch
Menu
➔
Settings
➔
More settings
.
2. Touch
Wi-Fi Direct
to turn Wi-Fi Direct On, or
touch
Wi-Fi Direct
to turn Wi-Fi Direct Off.
The
Wi-Fi Direct
screen displays, and your phone scans
for available Wi-Fi Direct devices and lists them under
Available devices
.
Configuring Wi-Fi Direct
1. From the Home screen, touch
Menu
➔
Settings
➔
More settings
.
2. Touch
Wi-Fi Direct
to configure settings:
When you turn on Wi-Fi Direct, your device
automatically searches for available Wi-Fi Direct
devices nearby.
3. Touch
Scan
to start a new search.
4. After scanning for nearby devices, touch a device to
connect to it, then follow the prompts to complete the
connection.
– or –
Touch
Multi-connect
to create a connection to devices
that support multi-connect. Touch
Scan
to search for
available mult-connect devices, then touch the devices
you want to connect to and follow the prompts to
complete the connection.
AllShare Cast
AllShare Cast lets your phone share the contents of its
display with other Digital Living Network Alliance (DLNA)
certified devices, such as Smart televisions.
For more information, refer to “AllShare Cast” on page 157.
Note:
To view more information about DLNA certified products
visit
http://www.dlna.org/home
.
DRAFT - Internal Use Only
DRAFT - Internal Use Only
To Next Page
Loading...
