EasyManua.ls Logo

Samsung SCH-R950 - Page 60

Samsung SCH-R950
237 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
54
Speaker
: routes the phone’s audio through either the speaker or
through the earpiece.
Tap
Speaker
to route the audio through the speaker. (You can
adjust the speaker volume using the volume keys.) A green line
displays under the Speaker button.
Tap
Speaker
again
to use the phone’s earpiece (see
“Using
the Speakerphone During an Active Call”
on page 56). The
green line displays when Speaker is not activated.
Mute/Unmute
turn the onboard microphone either on or off.
Tap
Mute
during a call to mute the microphone. A green line
displays under the Mute button.
Tap
Mute
again to unmute the microphone. The green line will
disappear when Mute is not activated.
Headset
connects to a Bluetooth headset.
Tap
Headset
during a call to activate a Bluetooth headset. A
green line displays under the Headset button.
Tap
Headset
again to de-activate the Bluetooth headset. The
green line will disappear when the Headset is not activated.
Press
for more options:
Contacts
: allows you to go to your Contact list.
Memo
: allows you to jot down a memo during a call.
Noise Suppression On/Off
: allows you to turn on the Noise
Suppression feature when you are in a noisy area. Turn it Off
when not needed to conserve battery power.
In-call sound EQ
: assigns a sound equalizer preset for use
during an active call. Sometimes you might need the sound to
be softer, clearer, or optimized for one ear or the other.
Placing a Call on Hold
You can place the current call on hold at any point during a
conversation. You can also make another call while you have
a call in progress if your network supports this service.
1. While on a call, tap
Hold
. This action places
the current caller on hold.
2. You can later reactivate this call by tapping Unhold
.
To make a new call while you have a call in progress
1. Tap
Hold
.
2. Tap
Add call
to display the dialer.
3. Enter the new number and tap
.
Once connected, the active call displays in a large box
at the top of your screen and the call on hold displays
in a smaller box in the middle of your screen.
Hold
Unhold
Hold
DRAFT - Internal Use Only
DRAFT - Internal Use Only

Table of Contents

Related product manuals