English _35
● SETUP
PRIVACY ZONE
You can set up to 12 privacy zones that will be hided for privacy of the subject when
recording.
Zone Setup
For selecting and saving each menu item, refer to “How to use the keyboard controller”. (page 20)
Select <MAIN MENU>-<PRIVACY ZONE>.
Select the number of the zone and press
[ENTER].
The Zone setup screen appears.
Select the <SET P/T/Z> and press
[ENTER].
Using the joystick, adjust the camera’s
pan, tilt and zoom.
Select the <PIXEL LEVEL>.
Select the pixel level for the SIZE and
LOCATION settings.
Select <POINT> and press [ENTER]. The
privacy zone available will be displayed in
points. Each time you press [ENTER], the
available points will be moved accordingly.
Use the joystick to set the position of each
point (top left, top right, bottom right,
bottom left), and press [ENTER]. Position
setting is completed.
Save the changes and move to the previous screen and select the <STYLE>.
Select the <COLOR> and pick a desired color.
Setting one or more privacy zone and enabling privacy function will disable the PIP
function.
For better privacy protection, make your privacy zone bigger than the required,
bigger by about 30%.
Video portion of mosaic pattern or colored by the privacy zone setup is not
recoverable.
1.
2.
3.
4.
5.
6.
7.
M
W
PRIVACY ZONE
X
To Next Page
Loading...
Need help?
General
