40_ setup
setup
Select the <START> and move the
camera using pan/tilt/zoom.
Your manual camera actions will be
recorded for up to 2 minutes, and returns
to the previous menu automatically.
To stop manual recording and return to the
previous menu before 2 minutes, press
[ENTER].
Scan Setup
You can set the SCAN operation to include a defined preset position.
For selecting and saving each menu item, refer to “How to use the keyboard controller”. (page 20)
Select <MAIN MENU>-<AUTO SET>.
Select the scan number.
SCAN setup screen appears.
Move the cursor to a number with the [
¾
] and the
corresponding preset is included in the
scan.
SCAN numbers confi gured for a certain page can be saved only in the corresponding
page. Make sure to save it before moving to the next page.
4.
5.
1.
2.
3.
4.
M
To Next Page
Loading...
