Samsung SCP-3430 - Factory Defaults

46_ setup
setup
Language
Select <LANGUAGE> and use the left/right
button to select a preferred display language.
FACTORY DEFAULTS
When selected, the <FACTORY DEFAULTS>
screen appears and you can reset all settings
to the factory default settings by selecting
the <OK>. However, the protocol, baud rate,
address and the language settings will not be
reset.
Note that the resetting the system to the
factory default will erase all settings data.
OSD COLOR
Selects the color of the on-screen display font.
PROPORTIONAL P/T
When selected <ON>, manual pan / tilt movement speed will vary proportionally to
the zoom ratio.
P/T SPEED
When selected <ON>, manual pan / tilt movement speed will be doubled.
M

FACTORY DEFAULTS
FACTORY DEFAULTS
OK
OK
CANCEL
W
W
OTHER SET
OTHER SET
X
X
LANGUAGE
LANGUAGE
ENGLISH
ENGLISH
FACTORY DEFAULTS
FACTORY DEFAULTS
OSD COLOR BW
OSD COLOR BW
PROPORTIONAL P/T ON
PROPORTIONAL P/T ON
P/T SPEED [2]
P/T SPEED [2]
AUTO CAL. OFF
AUTO CAL. OFF
D-FLIP OFF
D-FLIP OFF
PASSWORD OFF
PASSWORD OFF
Z6806125501A-SCP-3430(P)-ENGLISH46 46Z6806125501A-SCP-3430(P)-ENGLISH46 46 2010-05-04 오후 2:37:552010-05-04 오후 2:37: