SHUTTER
You can select a fixed fast electronic shutter speed in
7 options ranging from 1/120 to 1/10k, which is mostly
used to take a picture of a fast moving object.
As long as SENS-UP is set to AUTO, FIXED / FLICKERLESS to ON
/ BACKLIGHT to WDR, the SHUTTER menu is not available.
SENS-UP
Automatically senses the darkness level at night or in a low contrast scene, and extends the
accumulation time accordingly; you can select <AUTO> or <FIX> for a bright and sharp
image.
If the SHUTTER menu is set to fixed electronic shutter mode, the SENS-UP menu will not be
available.
If FLICKERLESS is set to ON, or BACKLIGHT to WDR, the FIX mode of the SENS-UP menu is not
available.
FLICKERLESS
This will prevent possible screen distortion due to a mismatch between the vertical sync
frequency and the blinking frequency of the lighting; if set to <ON>, the shutter speed will be
fixed to 1/100 second.
If SHUTTER is set to FIX, SENSE UP to FIX, and AGC to FIX, the <FLICKERLESS> menu is not available.
XDR
This will correct a brightness difference between different scenes for the optimal visibility by
calculating the ambient luminance contrast in a certain unit of pixels.
The higher the value is, the higher the correction level is.
M
CAMERA SET
CAMERA ID OFF
VPS OFF
IRIS ALC
AGC (VERY HIGH)
---
DNR MID
SHUTTER 1/100
SENS-UP (OFF)
---
FLICKERLESS (OFF)
---
XDR MID
To Next Page
Loading...
