8. Pull the jammed paper out.If the jammed paper
does not move when you pull, push the pressure
lever on each side up to loosen the paper, and
then remove it.
9. Return the lever, door, stopper, and guide to
their original position.
10. Close the rear cover. Printing automatically
resumes.
In the duplex unit area
If the duplex unit is not inserted correctly, a paper
jam may occur. Make sure that the duplex unit is
inserted correctly.
1. Pull the duplex unit out of the machine.
2. Remove the jammed paper from the duplex unit.
If the paper does not come out with the duplex
unit, remove the paper from the bottom of the
machine.
If you still do not see the paper, go to the next
step.
To Next Page
Loading...
