102 _Troubleshooting
5. Lift the front part of the tray slightly up to release the tray from the
machine.
If the paper does not move when you pull, or if you do not see the paper
in this area, stop and go to step 6.
If you do not see any paper in this area, stop and go to step 6.
6. Remove the paper in the direction shown. Pull it out gently and slowly in
order to avoid tearing the paper.
7. Insert the optional high capacity feeder and close the two covers.
In the multi-purpose tray
1. If the paper is not feeding properly, pull the paper out of the machine.
2. Open and close the side cover. Printing automatically resumes.
To Next Page
Loading...
